CLEAN. Ceramic Coating (8 Year)
Ceramic Coating Directions:
- Application: Apply to clean, decontaminated surfaces using a cross-hatch method. Level with the first clean and dry microfiber towel after 1-2 minutes when you see rainbowing starting to appear on the surface, and then buff with a second clean and dry microfiber towel.
In some conditions, you might get an immediate rainbowing effect, but make sure you still wait a full 1-2 min before wiping.
The coating rainbows very quickly because it is quite reactive, but think of that more like a skin that is forming. On a coating that is lower solids it won’t be so pronounced, but because this coating is quite thick there’s still a lot more wet coating under that “skin”.
When you are wiping with the first towel, if you feel like you are pushing it around at first and it looks a little smeary, simply let it sit for a couple of minutes, it will then continue to self level and go clear. Then you can start leveling and buffing.
Users should follow the times in the instructions with a minimum of 1 minute, and then adjust upwards if they think their conditions require it. Users could even leave the coating for 4-5 minutes and it’s not going to hurt.
Make sure you are well within the required temperature range for application and curing.
- Features:
- Available in 3-year and 8-year ultra premium formulations with superior durability
- Extreme chemical resistance (pH 1-14)
- Amazing gloss and gives the surface a richer appearance (jetting effect)
- Provides UV protection
- Contains high solids for a thicker film build on the surface
- Extreme hydrophobic properties
- Provides flexibility and elasticity to prevent fracturing
- Cures in only 1 hour (1 hour before getting wet, 7 days for a full chemical cure)
- Safe for all exterior surfaces (paint, glass, wheels, plastic trim, lights, PPF, vinyl wraps), including matte finishes
- 1 year shelf life if unopened, 6 months once opened (keep in the freezer once opened)
- Recommended application temperatures: 50-86F (10-30C) with the ideal being near 68F (20C)
- No maintenance toppers required. Just wash the vehicle regularly
- No PFAS or forever chemicals
One 30ml Bottle is enough to coat the paint of two average size cars. If you also plan on coating the other surfaces like glass, wheels, plastic trim, lights, and more than one bottle for one car! Of couse, no two people apply the same quantity of coating on their applicator, so these are rough estimates to give you an idea.
SDS (Safety Data Sheet)
Ceramic Coating Directions:
- Application: Apply to clean, decontaminated surfaces using a cross-hatch method. Level with the first clean and dry microfiber towel after 1-2 minutes when you see rainbowing starting to appear on the surface, and then buff with a second clean and dry microfiber towel.
In some conditions, you might get an immediate rainbowing effect, but make sure you still wait a full 1-2 min before wiping.
The coating rainbows very quickly because it is quite reactive, but think of that more like a skin that is forming. On a coating that is lower solids it won’t be so pronounced, but because this coating is quite thick there’s still a lot more wet coating under that “skin”.
When you are wiping with the first towel, if you feel like you are pushing it around at first and it looks a little smeary, simply let it sit for a couple of minutes, it will then continue to self level and go clear. Then you can start leveling and buffing.
Users should follow the times in the instructions with a minimum of 1 minute, and then adjust upwards if they think their conditions require it. Users could even leave the coating for 4-5 minutes and it’s not going to hurt.
Make sure you are well within the required temperature range for application and curing.
- Features:
- Available in 3-year and 8-year ultra premium formulations with superior durability
- Extreme chemical resistance (pH 1-14)
- Amazing gloss and gives the surface a richer appearance (jetting effect)
- Provides UV protection
- Contains high solids for a thicker film build on the surface
- Extreme hydrophobic properties
- Provides flexibility and elasticity to prevent fracturing
- Cures in only 1 hour (1 hour before getting wet, 7 days for a full chemical cure)
- Safe for all exterior surfaces (paint, glass, wheels, plastic trim, lights, PPF, vinyl wraps), including matte finishes
- 1 year shelf life if unopened, 6 months once opened (keep in the freezer once opened)
- Recommended application temperatures: 50-86F (10-30C) with the ideal being near 68F (20C)
- No maintenance toppers required. Just wash the vehicle regularly
- No PFAS or forever chemicals
One 30ml Bottle is enough to coat the paint of two average size cars. If you also plan on coating the other surfaces like glass, wheels, plastic trim, lights, and more than one bottle for one car! Of couse, no two people apply the same quantity of coating on their applicator, so these are rough estimates to give you an idea.
SDS (Safety Data Sheet)
Shipping will be calculated at checkout.
Shipping will be calculated at checkout.
CLEAN. Ceramic Coating (8 Year)
Ceramic Coating Directions:
- Application: Apply to clean, decontaminated surfaces using a cross-hatch method. Level with the first clean and dry microfiber towel after 1-2 minutes when you see rainbowing starting to appear on the surface, and then buff with a second clean and dry microfiber towel.
In some conditions, you might get an immediate rainbowing effect, but make sure you still wait a full 1-2 min before wiping.
The coating rainbows very quickly because it is quite reactive, but think of that more like a skin that is forming. On a coating that is lower solids it won’t be so pronounced, but because this coating is quite thick there’s still a lot more wet coating under that “skin”.
When you are wiping with the first towel, if you feel like you are pushing it around at first and it looks a little smeary, simply let it sit for a couple of minutes, it will then continue to self level and go clear. Then you can start leveling and buffing.
Users should follow the times in the instructions with a minimum of 1 minute, and then adjust upwards if they think their conditions require it. Users could even leave the coating for 4-5 minutes and it’s not going to hurt.
Make sure you are well within the required temperature range for application and curing.
- Features:
- Available in 3-year and 8-year ultra premium formulations with superior durability
- Extreme chemical resistance (pH 1-14)
- Amazing gloss and gives the surface a richer appearance (jetting effect)
- Provides UV protection
- Contains high solids for a thicker film build on the surface
- Extreme hydrophobic properties
- Provides flexibility and elasticity to prevent fracturing
- Cures in only 1 hour (1 hour before getting wet, 7 days for a full chemical cure)
- Safe for all exterior surfaces (paint, glass, wheels, plastic trim, lights, PPF, vinyl wraps), including matte finishes
- 1 year shelf life if unopened, 6 months once opened (keep in the freezer once opened)
- Recommended application temperatures: 50-86F (10-30C) with the ideal being near 68F (20C)
- No maintenance toppers required. Just wash the vehicle regularly
- No PFAS or forever chemicals
One 30ml Bottle is enough to coat the paint of two average size cars. If you also plan on coating the other surfaces like glass, wheels, plastic trim, lights, and more than one bottle for one car! Of couse, no two people apply the same quantity of coating on their applicator, so these are rough estimates to give you an idea.
SDS (Safety Data Sheet)
Ceramic Coating Directions:
- Application: Apply to clean, decontaminated surfaces using a cross-hatch method. Level with the first clean and dry microfiber towel after 1-2 minutes when you see rainbowing starting to appear on the surface, and then buff with a second clean and dry microfiber towel.
In some conditions, you might get an immediate rainbowing effect, but make sure you still wait a full 1-2 min before wiping.
The coating rainbows very quickly because it is quite reactive, but think of that more like a skin that is forming. On a coating that is lower solids it won’t be so pronounced, but because this coating is quite thick there’s still a lot more wet coating under that “skin”.
When you are wiping with the first towel, if you feel like you are pushing it around at first and it looks a little smeary, simply let it sit for a couple of minutes, it will then continue to self level and go clear. Then you can start leveling and buffing.
Users should follow the times in the instructions with a minimum of 1 minute, and then adjust upwards if they think their conditions require it. Users could even leave the coating for 4-5 minutes and it’s not going to hurt.
Make sure you are well within the required temperature range for application and curing.
- Features:
- Available in 3-year and 8-year ultra premium formulations with superior durability
- Extreme chemical resistance (pH 1-14)
- Amazing gloss and gives the surface a richer appearance (jetting effect)
- Provides UV protection
- Contains high solids for a thicker film build on the surface
- Extreme hydrophobic properties
- Provides flexibility and elasticity to prevent fracturing
- Cures in only 1 hour (1 hour before getting wet, 7 days for a full chemical cure)
- Safe for all exterior surfaces (paint, glass, wheels, plastic trim, lights, PPF, vinyl wraps), including matte finishes
- 1 year shelf life if unopened, 6 months once opened (keep in the freezer once opened)
- Recommended application temperatures: 50-86F (10-30C) with the ideal being near 68F (20C)
- No maintenance toppers required. Just wash the vehicle regularly
- No PFAS or forever chemicals
One 30ml Bottle is enough to coat the paint of two average size cars. If you also plan on coating the other surfaces like glass, wheels, plastic trim, lights, and more than one bottle for one car! Of couse, no two people apply the same quantity of coating on their applicator, so these are rough estimates to give you an idea.
SDS (Safety Data Sheet)
Shipping will be calculated at checkout.
Shipping will be calculated at checkout.
THOR Exclusive Brands
Clean by Pan the Organizer is a premium, custom brand crafted personally by Pan himself. From shampoo to ceramic coatings, each product has undergone multiple revisions to ensure they meet Pan's high standards of excellence.
Clean by Pan the Organizer is a premium, custom brand crafted personally by Pan himself. From shampoo to ceramic coatings, each product has undergone multiple revisions to ensure they meet Pan's high standards of excellence.
Conceived by Eddie and Jamie, our goal was to create a brand where quality meets affordability. We wanted to empower you to take control of your business and finances, leading to the creation of Detail Co. We uphold high standards without the high prices, serving the community with exceptional value.
Conceived by Eddie and Jamie, our goal was to create a brand where quality meets affordability. We wanted to empower you to take control of your business and finances, leading to the creation of Detail Co. We uphold high standards without the high prices, serving the community with exceptional value.